Separator

As a Separator JP Geotex is used between two dissimilar soils like fine soil & coares aggregate. It reduces the aggregate thickness to stabilize the sub-grade. JP Geotex maintains a uniform settlement of the sub-grade and hence improve the sub grade strength and prolong the life of the system.

Required Properties for an effective seperation:

Where seperation is the primary geotextile function, required criteria to consider our subgrade gradtation, Subgrde Strength, Loading size & Frequency(on soil mass), size and type of base material.

Filtration

As a Filter JP Geotex have different range of pore openings to reduce the potential of clogging. The range of pore openings shall be compared to the grain size of the material to be filtered to obtain the optimum filtration.

JP Geotex not only acts as a filter and a separator but also reduces the maintenance of erosion control systems and costs.

It effectively filters fine silt soils that are subjected to turbulent flow. Hence maintaining and enhancing the stability of erosion protection system.

Required Properties for an effective filteration:

Selection are soil permeability, soil gradation and where applicable hydraulic gradient, earth pressure.

Reinforcement

As Reinforcement Nonwoven Geosynthetics function involves stabilization of a soil mass by provision of tensile strength fabric system.

Required Properties for an effective reinforcement:

Drainage

Drainage is related to the role of filtration and is a function of the permeability of a geosynthetic and its pore opening size or photometry. Water is conveyed along the plane of the geosynthetic due to its construction and then to an outlet. Water may be vertically or horizontally conveyed.

Required Properties for an effective drainage:

Selection are soil permeability, soil gradation and where applicable hydraulic gradient, earth pressure.

Protection

JP Goetex is laid between the diffrent waterproofing membranes(HDPE, PVC, Etc) and soil to prevent it from puncturing.

Required Properties for an effective protection:

Selection are soil permeability, soil gradation and where applicable hydraulic gradient, earth pressure.

Geosynthetics //

Geo Grid

JP Geotex Grids are made from polyester knitted high tenacity yarn coated with UV stabalized polymeric compound. Our Geogrids are available with different opening sizes between the adjacent sets of longitudinal and transverse ribs large enough to allow soil strike-through from one side of the geogrid to the other. Hence in anchorage situations the soil strike-through within the apertures bears against the transverse ribs, which transmits the load to the longitudinal ribs via the junctions.

Geogrids are strong in tension. This fact allows them to transfer forces to a larger area of soil than would otherwise be the case since soils pull apart under tension.

Uni-axial

Typically Uni-axial have strength on one direction more than other

Functions:

Reinforcement

Bi-axial

Typically Bi-axial have equal strength on both directions

Functions:

Reinforcement