Separator

As a Separator JP Geotex is used between two dissimilar soils like fine soil & coares aggregate. It reduces the aggregate thickness to stabilize the sub-grade. JP Geotex maintains a uniform settlement of the sub-grade and hence improve the sub grade strength and prolong the life of the system.

Required Properties for an effective seperation:

Where seperation is the primary Nonwoven Geotextile function, required criteria to consider our subgrade gradtation, Subgrde Strength, Loading size & Frequency(on soil mass), size and type of base material.

Filtration

As a Filter JP Geotex have different range of pore openings to reduce the potential of clogging. The range of pore openings shall be compared to the grain size of the material to be filtered to obtain the optimum filtration.

JP Geotex not only acts as a filter and a separator but also reduces the maintenance of erosion control systems and costs.

It effectively filters fine silt soils that are subjected to turbulent flow. Hence maintaining and enhancing the stability of erosion protection system.

Required Properties for an effective filteration:

Selection are soil permeability, soil gradation and where applicable hydraulic gradient, earth pressure.

Reinforcement

As Reinforcement Nonwoven Geosynthetics function involves stabilization of a soil mass by provision of tensile strength fabric system.

Required Properties for an effective reinforcement:

Drainage

Drainage is related to the role of filtration and is a function of the permeability of a geosynthetic and its pore opening size or photometry. Water is conveyed along the plane of the geosynthetic due to its construction and then to an outlet. Water may be vertically or horizontally conveyed.

Required Properties for an effective drainage:

Selection are soil permeability, soil gradation and where applicable hydraulic gradient, earth pressure.

Protection

JP Goetex is laid between the diffrent waterproofing membranes(HDPE, PVC, Etc) and soil to prevent it from puncturing.

Required Properties for an effective protection:

Selection are soil permeability, soil gradation and where applicable hydraulic gradient, earth pressure.

Geosynthetics //

Geotextile

The most common product in the family of Geosynthetics is Nonwoven Geotextile fabrics. There are two types of Nonwoven Geotextile - Woven & Nonwoven. Both the Geotextiles are manufactured from high quality fibres & available in polypropylene a& polyster.

Nonwoven Geotextile

Nonwoven Geotextile is a random assembly of synthetic fibers, put together, which either are mechanically bonded to make a Nonwoven Geotextile having elongation more than 50%.

  • Nonwoven Geotextile fabrics are manufactured that based on typical application required.

Functions:

Filtration , Separation , Drainage , Protection

Woven Geotextile

Woven Nonwoven Geotextile are multi filament or mono filament weaved toghether in warp & weft directions to form a woven fabric having very high tensile strength with elongation less than 40%.

Functions:

Reinforcement